MISHIMOTO Front-Mount BLACK Intercooler w/Polished Pipes, 15+ Subaru WRX

- 20%

$1,500.00 $1,200.95

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

In stock (can be backordered)

FREE SHIPPING

SKU: MISH-MMINT-WRX-15BK Categories: , , Tag:

Mishimoto high performance intercooler kit (Black) for a 2015-2018 Subaru WRX (with 2.0L Turbocharged 4-cylinder). Install this to reduce turbo stress, extend the life of your turbo, reduce pressure drop, decrease intake temperatures, and improve airflow.

From the Manufacturer:
“This 2015 WRX front-mount intercooler kit contains everything needed for a worry-free installation, including an application-specific crash bar that both supports the intercooler and mounts to existing points on the vehicle. No cutting of the front bumper or drilling is required to install the crash bar and intercooler. The kit includes all necessary mounting brackets, including a new bracket for the air intake. Our 2015 WRX front-mount intercooler kit also includes every coupler and clamp you need for a clean install, and complements the Mishimoto Subaru WRX Performance Air Intake for added cooling power. ”

Fits
2015+ Subaru WRX

Manufacturer Info:

Fits the 2015+ Subaru WRX
3.5″ Thick intercooler design optimized for maximum flow
Designed to work with Mishimoto Performance Air Intake and stock intake
No modification to front bumper and retains stock fog lights
Includes black powder-coated steel, tubular crash bar
Smooth cast end tanks allow the best possible airflow in and out of the intercooler
Optimal core design for maximum cooling efficiency with minimal pressure drop
Includes all necessary couplers, brackets, and accessories
Intercooler available in Sleek Silver, Stealth Black, or Bold Gold
CARB EO #: D-759
Mishimoto Lifetime Warranty

Installation Torque Specs
27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

Silicone Couplers
(1) 2.25″ 45° Coupler
(1) 2.25″ to 2.75″ 45° Transition Coupler
(1) 2.5″ to 2.75″ 55° Transition Coupler
(1) 2.5″ to 2.75″ 65° Transition Coupler
(1) 2.75″ Straight Coupler

Purchase Includes
(1) Bar-and-Plate Intercooler
(1) Steel Crash Bar w/Mounting Hardware
(2) Hot-Side Intercooler Pipes
(2) Cold-Side Intercooler Pipes
(1) Air Intake Bracket
(1) 2.25″ 45° Coupler
(1) 2.25″ to 2.75″ 45° Transition Coupler
(1) 2.5″ to 2.75″ 55° Transition Coupler
(1) 2.5″ to 2.75″ 65° Transition Coupler
(1) 3.00″ Straight Coupler
(1) BPV Recirculation Hose
(1) BPV Vacuum Hose
(1) 30-45mm Worm Gear Clamp
(2) 1.75″ T-Bolt Clamps
(3) 2.5″ T-Bolt Clamps
(2) 2.75″ T-Bolt Clamps
(5) 3″ T-Bolt Clamps
Mishimoto Lifetime Warranty

Note
Mishimoto recommends that this intercooler kit, not be used with the stock ECU programming. It is highly recommended that the customer be able to retune the vehicle’s ECU after installing the intercooler kit. Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle.

This kit is rated for approximately 600 whp during normal operating conditions. Maximum horsepower potential will be near 700 whp. Exceeding these horsepower or pressure limits could require a custom-size front-mount intercooler.

THIS FRONT-MOUNT INTERCOOLER KIT WILL NOT FIT WITH THE MISHIMOTO 2015+ WRX OIL COOLER KIT

CRASH BAR SPECS
Steel Construction with Black Powder Coat
Application-Specific Mounting Holes

Installation Torque Sepcs
27 in-lbs (3N*M) recomended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

Pipe Diameter
Hot-Side: 2.25″
Cold-Side: 2.5″& 2.75″

Constant Tension T-Bolt Clamps Specs
(2) 1.75″ T-Bolt Clamps
(3) 2.5″ T-Bolt Clamps
(2) 2.75″ T-Bolt Clamps
(5) 3″ T-Bolt Clamps

Core Thickness
3.5″

Cold-Side Intercooler Pipe Specs
–Made from Polished Mandrel-Bent Aluminum
–2.5″ & 2.75″ I.D. Pipes
–Includes Upper and Lower Intercooler Pipes

Hot-Side Intercooler Pipe Specs
–Made from Polished Mandrel-Bent Aluminum
–2.25″ I.D.
–Hot-Side has CNC-Machined Flange for a Leak Free Connection to Turbo
–Includes Two Lower Intercooler Pipes

Engine Codes
FA20DIT

Chassis Codes
VA

Fits
2015+ Subaru WRX

Tank Wall Thickness
3.5mm

Max Rec. PSI
30 psi

Outlet
2.75″

Core Length
28″

Core Height
8.05″

Core Width
3.5″

Inlet
2.45″

Core Size
28″ x 8.05″ x 3.5″

Overall Width
5.4″

Overall Height
8.6″

Overall Length
37.7″

Construction
Bar-and-Plate

Max Rec. HP
600 whp

Specification: MISHIMOTO Front-Mount BLACK Intercooler w/Polished Pipes, 15+ Subaru WRX

Weight57 lbs
Dimensions48 × 26 × 12 in
Condition

New

MPN

MMINT-WRX-15BK

Brand

Mishimoto

Make Model Year
Subaru WRX 2015 - 2018
MISHIMOTO Front-Mount BLACK Intercooler w/Polished Pipes, 15+ Subaru WRX
MISHIMOTO Front-Mount BLACK Intercooler w/Polished Pipes, 15+ Subaru WRX

$1,500.00 $1,200.95

OutclassAuto.com
Reset Password
Compare items
  • Total (0)
Compare
0