MISHIMOTO Front-Mount BLACK Turbo Intercooler Kit w/Intake, 08-14 Subaru WRX

Mishimoto high performance cast aluminum intercooler kit (Black) for a 2008-2014 Subaru WRX/Impreza WRX (with 2.5L Turbocharged 4-cylinder). Includes the optional WRX/STI Performance Race Intake. Install this to reduce turbo stress, extend the life of your turbo, reduce pressure drop, decrease intake temperatures, and improve airflow. The included race intake will give your WRX maximum, unrestricted airflow, for a beefier engine tone and more power.

From the Manufacturer:
The kit contains everything needed for a worry-free installation, including an application-specific crash bar that both supports the intercooler and mounts to existing points on the vehicle. No cutting or drilling is required to install the crash bar and intercooler.

Manufacturer Info:
Fits the 2008–2014 WRX
Includes optional Mishimoto Subaru WRX/STI Performance Race Intake
Mishimoto Lifetime Warranty
Intercooler design optimized for maximum flow
Smooth cast end tanks allow the best possible airflow in and out of the intercooler
Optimal core design for maximum cooling efficiency with minimal pressure drop
Rated to 600 whp
Includes all necessary hardware, brackets, and accessories
Fits left-hand and right-hand drive models
Intercooler available in Sleek Silver or Stealth Black
Works with stock bypass valve or aftermarket blow-off valve

Installation Torque Specs
27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

Silicone Couplers
(2) 2.25″ Straight Couplers
(3) 2.75″ Straight Couplers
(1) 2″ to 2.75” Transition Coupler

Purchase Includes
(1) Bar-and-Plate Intercooler
(1) Steel Crash Bar w/Mounting Hardware
(3) Hot-Side Intercooler Pipes
(3) Cold-Side Intercooler Pipes
(1) BPV Flange Adapter
(1) Relocation Brackets for Aluminum Overflow Can
(2) 2.25″ Straight Couplers
(3) 2.75″ Straight Couplers
(1) 2″ to 2.75″ Transition Coupler
(1) BPV Recirculation Hose
(1) Intercooler to Throttle Body Hose
(1) 2″ T-Bolt Clamp
(5) 2.5″ T-Bolt Clamps
(9) 3″ T-Bolt Clamps
(2) 1.5″ T-Bolt Clamps
(1) 12″ of Thermal Wrap
(1) 3′ of 1/4 Rubber Hose
(5) Black Zip Ties
Optional Air Intake Kit
(1) Oiled Filter
(1) Aluminum Intake Pipe
(1) 3″ to 2.75″ Transition Coupler
(2) 3″ Worm-Gear Clamps
(2) Black High-Temp Zip Ties

Note
Mishimoto recommends that this intercooler kit, with or without the optional air intake, not be used with the stock ECU programming. It is highly recommended that the customer be able to retune the vehicle’s ECU after installing the intercooler kit. Power gains will vary depending on the size of the turbo, exhaust system, fuel system, and type of ECU tune that is applied to the vehicle.
This kit is rated for approximately 700 whp, or 30 psi of turbo boost. Exceeding these horsepower or pressure limits could require a custom-size front-mount intercooler.

Pipe Diameter
Hot-Side: 2.25″
Cold-Side: 2.75″

Constant Tension T-Bolt Clamps Specs
(1) 2″ T-Bolt Clamp
(5) 2.5″ T-Bolt Clamps
(9) 3″ T-Bolt Clamps
(2) 1.5″ T-Bolt Clamps

Core Thickness
3.5″

Cold-Side Intercooler Pipe Specs
– Made from Polished Mandrel-Bent Aluminum
– 2.75″ I.D.
– Includes Upper and Lower Intercooler Pipes

Hot-Side Intercooler Pipe Specs
– Made from Polished Mandrel-Bent Aluminum
– 2.25″ I.D.
– Includes Upper and Lower Intercooler Pipes w/ Gasket

Crash Bar Specs
– Steel Construction with Black Powder Coat
– Application-Specific Mounting Holes
– 6.5 lb (2.9 kg)

Intercooler/Throttle Body Coupler Specs
Max Temperature: 330°F (166°C)
– 2.75″ I.D.
– 3.15″ O.D.

WRX BPV Hose Specs
– Application-Specific Bend for this Kit
– 1.25″ I.D.
– 1.5″ O.D.
– 4mm Thick

Engine Codes
EJ205
EJ255

Chassis Codes
GH
GE
GR
GV

Fits
2008–2014 WRX

Weight
25 lbs

Tank Wall Thickness
3.5mm

Max Rec. PSI
30 psi

Outlet
3″

Core Length
28″

Core Height
8.25″

Core Width
3.5″

Inlet
2.75″

Core Size
28″ x 8.25″ x 3.5″

Overall Width
5.5″

Overall Height
9″

Overall Length
44″

Construction
Bar-and-Plate

Max Rec. HP
600 whp

Make
Subaru

Models:
2008 Subaru Impreza WRX 2.5L Turbo
2009 Subaru Impreza WRX 2.5L Turbo
2010 Subaru Impreza WRX 2.5L Turbo
2011 Subaru Impreza WRX 2.5L Turbo
2012 Subaru Impreza WRX 2.5L Turbo
2013 Subaru Impreza WRX 2.5L Turbo
2014 Subaru Impreza WRX 2.5L Turbo